Use Moisture Separators

Industrial Moisture Separators

The Didion Separator Company is a leading manufacturer of a full gamut of moisture separators. Our products have the capacity of eliminating 99% of entrainment from steam, air, gas and vapor pipelines. The droplet removal size is 10 microns and up. Our separation is accomplished by means of centrifugal force. As we are aware of the detrimental impact water droplets or moisture can make on steam-based and steam-heated processes, our internal elements are clean, durable, and efficiently built.

From the various models we offer under moisture separators, there are three standard models that we widely cater, namely, Type DSL, Type DST, and Type DSU. All these separators have the efficiency of eliminating 99% of entrainment from the system. In addition, our separators are not bound to cause a significant pressure drop either. Hence, better efficiencies are achieved too. We can also customize our products to meet each and every industrial and customer requirements.


At Didion Separator Company, we are determined to helping you minimize the water droplet impact on your equipment by offering state-of-the-art range of custom and standard industrial moisture separators. We have a wide range of inventoried steam separators too. We contract with a third party Authorized inspection agency – Hartford Steam Boiler (HSB Global Standards) and hold ASME and National Board Stamps such as U, U2, U3, S, PP, R and CE. We guarantee our products are well built and reliable.

You can contact Didion Separator Company in the following ways:

Speak with our representative at 419-483-2226

Visit us at www.didionseparator.com

Email us at sales@didionseparator.com

Better Efficiencies with Didion Steam Separators

You’re likely aware that steam with moisture content (wet steam) is detrimental to your process and systems. But it could cause more damage that you imagined. For one, it leads you to spend more on system maintenance. And, steam could be the reason your flow meters and control valves begin to function inconsistently. Experts opine that that wet steam has a direct impact on steam-driven or steam-heated systems, thus resulting in lower productivity.

Industrial Steam Separators

However, the best part is that there’s a single solution to these multiple problems – industrial steam separators. Didion Separator Company’s moisture separators, available in three models, are highly recommended as they are capable of entraining up to 99% of all entrainment that measures 10 microns and larger. It is effectively used with air, vapor, gas, and steam pipelines. Once installed, Didion steam separators do not cause a significant pressure drop in your systems.

If your needs are unique, Didion Separator Company can create bespoke units for you with the desired efficiencies. All standard 150# units are designed for 150 psig @ 500° F., and all standard 300# units are designed for 500 psig @ 650° F. All of our moisture separators are code-stamped per ASME Section VIII, Div I. Here are our three moisture separator models:

• Type DSL: This ASME-approved in-line separator is suited for horizontal or vertical down flow.
• Type DST: This is an ASME compliant horizontal in-line separator.
• Type DSU: This is a vertical up-flow in-line separator.

To learn more about our steam separators, please visit us at www.didionseparator.com. Our staff of expert engineers, designers, certified welders, and NDE technicians would be glad to honor your requirements.

Reasons to Invest in Didion Moisture Separators

Did you know that in some cases, even 5% moisture in your steam-heated or steam-driven equipment can cause a sizeable loss of performance efficiencies? One of the best solutions to eliminating wet steam is by using high quality industrial moisture separators. Didion Separator Company offers three highly efficient steam separator models—Type DSL model, Type DST model, and Type DSU model. Also, we can design custom units to meet your unique requirements.

Industrial Moisture Separators

Water droplets and suspended particulate matter measuring 10 microns or more can be effectively removed using a moisture separator. Our separators can eliminate up to 99% of all entrainment from gas, air, and vapor pipelines. You can expect negligible pressure drop levels during this process. Our standard or custom separators can be provided in versatile configurations depending on your requirements.

Simply stated, moisture separators are a low-cost insurance against moisture-related threats that can damage the internal elements of several machines. For instance, high velocity steam contains water droplets. When these water droplets continually hit the internals of your equipment, they cause an erosive effect.

1. At Didion Separator Company, we stand committed to the safety and efficiency of your processes. Here are some facts about our steam separators.
2.  Standard steam separator models can be shipped for delivery immediately. For custom models, it could take four to six weeks (or slightly longer depending on external factors such as material availability).
3. All standard 150# units are designed for 150 psig @ 500° F., and all standard 300# units are designed for 500 psig @ 650° F.
4. We use the highest quality stainless steel internal elements in all our moisture separators to guarantee corrosion-free service for years.
5. We hold ASME stamps for the manufacturing of pressure vessels to ASME Sect. VIII (Div 1 & 2), for the manufacturing of Power Boilers to ASME Sect. 1, and for the manufacturing of Pressure Piping to ASME Sect. 1 and B31.1. We also hold the National Board Stamp for repairs and alterations to Code Stamped equipment.

These are but a few things you can expect when you partner with Didion Separator Company. To know more about our moisture separators, please visit our website at www.didionseparator.com.

Intelligently Engineered Moisture Separators from Didion Separator Company

Investing in moisture separators is ultimately a long-term investment in your system components. Didion Separator Company’s Type DSL, DSU, and DST Separators are the best way to ensure that downtime resulting from wet steam doesn't hamper your operations. Our separators can efficiently eliminate 99% of all entrainment that measure 10 microns or more. They show consistent results when used with gas, steam, air and vapor pipe lines. Our moisture separator manufacturers ensure that separators are designed in such a way that they do not cause any significant pressure drop.

Didion Separator Company holds a ready stock of standard steam separators at any given time. However, for unique applications that require efficiencies above our standard, we can entirely custom-design and fabricate units per your flow requirements and material specifications to suit your delivery requirements. Our separators go through a battery of tests to ensure that only code compliant products reach customers.

To ensure that these steam separators offer you an extended service life, we fit the separators with stainless steel internal elements. Also, your concerns about corrosion are addressed by means of a built-in corrosion allowance for years of uninterrupted service. When you invest in a Didion product, quality and performance will never be a cause for disappointment.

The Didion Separator Company is a division of Didion's Mechanical that has been fabricating pressure vessels, piping, heat exchangers and other customized process equipment and machinery since 1977. To learn more about our products and capabilities, please visit us at www.didionseparator.com. Our representatives will be glad to assist you.